How to Use the Rear Winch on the Chassis of Dongfeng Six Drive Off-road Special Vehicle

                                                                                      (Dongfeng six-wheel drive 2102N off-road special vehicle chassis)

Step 1: First lift the rear winch handle upwards and move it toward the slot until it fits perfectly.

Step 2: Enter the cab, activate the vehicle switch button, and depress the clutch to the bottom first.

Step 3: Turn on the power take-off switch (press the small button on the top of the power take-off button and press it down to open, and press it up to close)

Step 4: Remove the wire rope from the rear winch: One person needs to hold the hook of the rear winch, and the other person presses the rope release button upward to straighten the wire rope. Slowly lift the clutch through the winch drive shaft to start the rope release work.

Step 5: The rear winch retracts the wire rope: one person needs to hold the rear winch hook and straighten the wire rope, and then another person presses the rope retraction button downwards in the cab, and slowly lifts the clutch through the winch drive shaft. Rope release operation